When you have a sophisticated technology like an electric skateboard, then you need to know how to maintain electric skateboard.
Electric skateboards are becoming very popular among urban youth and people of other ages as well. More people are using electric skateboards to ride around the city and also using them to get their daily chores done.
However, in order to get the best out of these skateboards, you need to maintain them. Otherwise, they will malfunction and hamper your movement. Also, you will need to shell out extra money in order to fix the electric skateboards.
That is why we have come up with tips to maintain your electric skateboards so that they last longer and you don't miss out on all the fun.
Here they are.
How to Maintain Electric Skateboards: Best Tips
Here are the tips to maintain your electric skateboards the best way.
Clean the Skateboard After Every Ride
If you are riding an all-terrain electric board, then we suggest cleaning your electric skateboard after each ride.
You need to clean the board from all the dirt and dust by using a slightly damp or microfibre cloth. You must clean the skateboard deck, grip tape, and any other smooth surface area.
However, you have to be very careful that you don't get any water or dirt inside the electronic parts. After this is done, simply wipe down the board with a dry cloth.
Don't overcharge the battery
Make sure you do not overcharge your battery. And do not leave the electric skateboard on charge for long periods of time. It will overcharge the battery, and later lead to damage to the battery's cells and shorten its longevity.
We also suggest that when charging you must first connect the charger to the e-skateboard before plugging it into the socket. And if you are not using your skateboard for a while, it is important to charge the battery at least once a month.
Clean the bearings
When you ride your electric skateboard it is bound to get dirty. If you are left in that condition for a long time, then it will affect the board's riding quality. You will see that It may even reduce the skateboard's battery performance and lead to potential bearing failure. So, therefore it is very important that you clean the bearings regularly so that your skateboard wheels roll smoothly and you can experience the smoothest ride possible.
You have to remember that water and electronics do not normally mix well, so it is important to make sure that none of the water gets into the wheel bearings. Water can easily cause defects to the bearings and you will then need to replace them. You will see this happening when you hear a scraping noise coming from the bearings.
Rotate the wheels regularly
This is a very important technique. As the drive wheels on an e-board are always in contact with the ground surface, the wheels are likely to wear out the fastest. Therefore it is a good idea to rotate the wheels once in a while, especially when you are not using the skateboard.
It is suggested that you replace your wheels when the tires are less than 5mm thick. And for any off-road skateboards, it is advised to keep the tire pressure between 35 psi and 50 psi.
Check screws and nuts before every ride
You have to ensure that all screws and nuts throughout the electric board are in place and tight. This includes wheel nuts, truck nuts, and so on.
You need to use a 1/2, 3/8, or 9/16 wrench or socket.
Storage safely
Always store your electric skateboard at room temperature and in a dry area. The Lithium battery does not bear well to high heat. You have to make sure that you never leave it in a hot space - like in the sun or a hot car. You can leave it in a dark place like the garage or closet.
If you are not using your board often and want to store it away, you should charge the battery to a 40-50% capacity before doing so. Remember to put it in a space that always has room temperature!
Check and clean the skateboard motors
You have to make sure that you regularly clean the motors for better performance and lifespan. If you are riding in rougher conditions or terrains, we suggest you clean the engine after every ride.
Also, always inspect your motor before and after every ride. You have to make sure there are no strange noises coming from the engine and that it is clean from dirt and debris.
Also, if the motors get overheated when riding, give it time to cool down before you continue riding.
Check the drive belt before every ride
The users have a common cause of damage or wear to the electric skateboard's drive belt. That is getting something stuck between the belt and gear. So it is very essential for you to always check your belt before every ride. We also suggest that after every ride you should have a quick look and see if there is any unusual wear to the belt. You have to do this by turning the wheels so this will also spin the belt.
And by doing regular checks and cleans, you will be able to detect easily what is causing the wear early and simply remove it. This way, you won't end up damaging the drive belt irreversibly and you don't have to replace it.
These are tips on how to maintain electric skateboards. And if you are looking for an electric skateboard that will last longer and serve you for a long period of time, then you can try,
BASE CAMP Electric Skateboard
The BASE CAMP Electric Skateboard balances item weight and load capacity. Electric skateboards are normally thick because of their electronic parts. But hats off to Base Camp for creating a mini electric skateboard weighing only 5.5kg only.
It can also load a rider as heavy as 220lbs. Therefore, it's lightweight along with heavy-duty. This skateboard's 8-layered maple body is an absolute plus. These pieces make the design durable, flexible, and responsive when riding.
Along with an abrasive piece of grip tape, the deck holds the skater's feet firmly. This e-board becomes safer to ride.
This skateboard imposes safety for the rider but on itself too. This lightweight board is already a benefit for many. But to own one with a bag in the package is rare. This skateboard comes with a carrying backpack, making mobility not an issue for its users.
Specs:
Price: $332
Battery - 4000 mAh (UL 2272, CE Certified)
Wheels - 90 mm x 51 mm, 85A
Motor - 300w Brushless Single Hub Motor
Recharge - 2-4 Hours
Mode - 4 Speed and Brake Mode
Weight - 5.5 Kg/11 lbs
Range- 9 Miles/14.5 Km
Top Speed- 10 Miles / 16 Km Per Hour
Max Load - 100 Kg/220 lbs
Get the Right Electric Skateboard and Maintain It the Right Way!
Electric skateboards are not cheap and it will be very unfortunate if your skateboard gets broken because you couldn't maintain it the proper way.
That is why you should follow our guide and maintain it the right way. Also, we have mentioned a skateboard that will fulfill all your needs. And if you face any issues do let us know.
Leave a comment
All comments are moderated before being published.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.